732 AMS - Addressable Moisture Sensor

• Detects the presence of moisture in contained areas
• Sensor deployment can be miles form the monitoring system
• Built-in over-voltage protection
• Reusable sensor cable (Moisture detection when as little as 1/4" of the sensor cable is wet)
• Compatible with all existing Sparton monitoring systems having addressable capability
• Dimensions/Weight: 3.4" x .63" x .88"/Approximately 1 oz.
• Case Material: Electronics are enclosed in a polypropylene enclosure
• Power: Supplied over reporting pair
• Standard Sensing Cord in either 4 or 8 foot lengths but other lengths available upon request.
  
  The 732AMS Addressable Moisture Sensor is designed to detect the presence of moisture in contained areas and report the information via a Sparton Monitoring System. These contained areas typically are but not limited to: underground, buried and aerial splice cases, terminals and enclosures. The 732AMS utilizes proven addressable technology that has been mated with a reliable high technology sensor cable that is installed in computer rooms around the world.
  
  When dry, the sensor reads the resistor pad installed at the end of the sensor cable as a normal condition. When wet, the sensor shorts and resistance drops dramatically. Electronics in the 732 AMS then encodes these values and reports this information back to the monitoring equipment for processing.
  
  The 732 AMS assists the technician to effectively correct the alarm condition by pinpointing the location of moisture penetration.
  
  The sensor cable is reusable and once dried the resistance returns to its normal state and the 732 AMS will perform as it did when in its previously dry condition. The 732AMS is designed to withstand the harsh environment of the outside plant environment and will detect moisture on as little a ¼” of the sensing cable.